Automatic Diesel Engine Pre-Heating Kit 12V or 24V
Optional Simultaneous Heating & Post Heating
for Diesel Engine Vehicles, Boats & Generators
Only Product of its kind!...GREAT Value for money!
Description:
This Automatic Engine Pre Heating System Kit with optional Simultaneous Heating & Post Heating is of our own patented design. It comprises of an Electronic Timer, Heavy Duty 80 Amps Solenoid Switch, Sensor and an Indicator Lamp. It comes fully pre-wired and mounted on a steel plate.
This kit has been specially developed for diesel engines that have Glow Plugs but do not have an automatic heating system.
The system functions through an Electronic Timer which automatically adjusts the glow duration time. The Timer is controlled by the Sensor which senses the engine temperature. When the Ignition Switch is turned on, the Timer activates the Heavy Duty Solenoid Switch/ Glow Plug Relay connecting the
battery and glow plugs. The Indicator Lamp mounted on the dashboard indicates the glow duration after which the starter should be turned ON.
This DIY kit comes mounted on a steel plate which can be affixed with 4 screws in the engine compartment. The kit comes fully pre-wired and only connections to the battery, Ignition Switch and Glow Plug connections need to be made. The Indicator Lamp can be mounted on the dashboard and the aluminium Sensor can be attached to any engine bolt to sense the engine temperature.
The Timer comes preset to 7 seconds for the first cold starting temperature with 68F (20C) taken as a base ambient temperature but we can change this preset ambient temperature timing to as high or as low as you want. For extremely cold climates for e.g where temperatures drop below -30F, we also offer optional Simultaneous Heating (Heating during Starting and optional Post-heating (Heating after Starting). Each of these options will cost an additional $2.00. Please select a 12V or 24V system based on your battery voltage.
The system automatically adjusts the heating time based on your current engine temperature. For e.g. If the engine temperature is at -40F, the Timer will stay on longer for upto 24 seconds. If the engine temperature is 68F, the Timer will stay on for 7 seconds. If the engine temperature is 90F or higher, the Timer will come on for a second or less.
Dimensions:
Approx Length: 175mm; Width: 80mm; Height: 80mm;
Weight: 610 grams
Applications:
Our Engine Pre-Heating System allows instant cold starting of the engine and also eliminates white smoke during starting. This particular DIY kit is for diesel engines that do not have an automatic engine heating system. It can be used in any Vehicle, Boat or Generator run with a diesel engine with glow plugs.
Condition:
Brand New. Fully Tested. Direct from factory.
Secure Shopping
