ALTERNATING EMERGENCY FLASHER HEAVY DUTY 500 Watts, 12V DC
Sorry currently out of stock
Description:
NEW Heavy Duty (500 Watts at 12VDC) accessory for alternately switching two lights or two rows of lights for decorative effect or emergency warning . Great low cost alternative to Revolving Light without any moving parts.
Dimensions:
Approx Length: 70mm; Width: 50mm; Height: 50mm; Weight: 105 grams
Applications:
Ideal for tourist omnibuses, boats, airport / construction / industrial /police vehicles for producing audio-visual warning . Can also be used indoors by connecting to an AC to DC converter of adequate capacity
This flasher can also be used to flash high beam headlights on vehicles. It produces a standard alternating
"wig-wag"
side to side
pattern using the vehicle's existing high beam headlights.
This is the highest powered unit available rated at 500Watts which effectively means you could have every light on your car flashing
Connections for headlight flashing:
Red wire to live via a switch.
Blue wire with the yellow end goes to earth
Other 2 blue wires goes to the lights
which you want to flash. Eg: 1 wire to the left hand headlight and one wire to the right headlight
Terminals are lucar female crimp and solder type.
Please note that the flasher will not work unless both the blue wires are connected to a light. It will not work with just one wire connected to just one light it needs 2 lights to be connected .
Caution
Using this unit with headlights is at user's risk and discretion as alternating headlights can cause extreme discomfort to drivers of oncoming vehicles.
Due to noise pollution regulations we do not recommend that this flasher unit be used for horns.
Condition:
Brand New. Fully Tested. Direct from factory.